Three effect automatic control continuous evaporation mould--Wenzhou Shunda drying equipment Co., Ltd

Product description	Applications area	Type and parameter	Schematic diagram

Multi effect evaporation is the multiple evaporators end-to-end, series operating system to produce before the secondary steam as the heating steam in the aftereffect, the heat can be repeatedly used. Its characteristics are as follows:

1, good operating environment, completely avoid the pollution of chemical waste, almost no waste emissions. Continuous operation of concentrated systems, operating personnel, low energy consumption, investment province.

2, the equipment in the same evaporator for different physical and chemical properties of the material to complete the operation of evaporation crystallization.

3, by the multi effect heater, multi effect evaporator, evaporation and crystallization, condenser and steam water separator composition.

4, the evaporation crystallization equipment and other types of equipment compared to the obvious advantages, the use of advanced automatic control of multi effect evaporation crystallization process technology, the overall equipment performance reached the advanced level at home and abroad.

5, crystallization temperature of evaporation crystallization 40~135. (according to the nature of the material)

6, evaporation capacity of the evaporation of the crystallization of 500kg/h~50T/h.

Ammonium sulfate, zinc sulfate, sodium sulfate, copper sulfate, Magnesium Sulfate, sodium chloride, ammonium chloride and other fields.

model Specifications	ML J500	ML J1000	ML J1500	ML J2000	ML J3000	ML J5000	ML J6000	ML J8000
Evaporation rate(kg/h)	500	1000	1500	2000	3000	5000	6000	8000
Steam pressure(MPa)	0.8~0.25
Steam consumption(t/h)	170	340	510	680	1020	1700	2040	2720
Circulating water(t/h)	15	30	45	60	90	150	180	240
medium
	Vacuum pressure（MPa）				Evaporation temperature（℃）
A.	-0.01~ -0.03				90~95
Two.	-0.03~ -0.05				70~75
Three.	-0.06~ -0.08				55~65
Concentration ratio	1.25~1.35